Videojet Excel Series 100 Printer Manual

You will find information for the following issues here:

What happens if I can no longer switch on the printer?

• Check main switch (right-hand side). Should be in 'up' position.
  • Circuit breaker activated. Press button on the main connection block.
  • 9-volt battery flat. Do not replace when power is off. Measure voltage at battery or call the hotline.

1. Videojet Excel Series 100 model Excel/100 Inket Printer. Working Condition. Condition is Used. Shipped with USPS Priority Mail. Internals all cleaned out of ink with standard make-up solution before being stored to await sale. Unit comes with Stand. WORKING CONDITION.
2. Frequently asked questions about troubleshooting Videojet Excel series printers and customer service are answered in this page.
3. Videojet EXCEL Series 2000 inkjet Printer The Videojet EXCEL 2000® and 2000 Opaque inkjet printers deliver the highest degree of reliability and print quality at the speeds you need. They will code reliably in a variety of applications where speed, quality of code and flexibility are key factors.

What should I do if I can no longer see anything on the display?

• If the printer is running normally but no display is visible, adjust the contrast. Please call the hotline.

Industrial InkJet Printing Machine. The Videojet® 1510 small-character continuous industrial inkjet printer sets a higher standard in marking and coding performance for maximum uptime. Designed for medium-duty applications that involve printing codes for multiple shifts per day and between 1.

'No air for warmup Fault'

• Check input pressure on pressure gauge (approx. 6 bar).
• Check quality of compressed air. It must be free of oil and water.

What should I do when 'Ink Out Fault' occurs?

Videojet Printers Troubleshooting

• Check the fluid level (make-up, ink).
• If the level is OK, please call the hotline.

What should I do when 'Phasing Fault' occurs?

• Is the head dirty? Turn the printer off, clean with make-up solution, dry the printhead and re-start.
• Check ink expiry date and replace with fresh ink if expired.

What should I do when 'No Signal Fault' occurs?

• Is there a jet? If not, the nozzle is blocked.
• The catcher may be overflowing and the return suction line blocked. It should be cleaned.

What should I do when 'Reservoir Overfill' occurs?

• Cleaned too often or for too long, too much fluid in the module.
• Drain some fluid (approx. 20ml) from the module. Call the hotline.

What should I do when 'HV Fault' occurs?

Videojet Ink Printer

• High Voltage plates in the printhead are dirty. Clean.
• Short circuit through ink. Clean head thoroughly.

What should I do when 'Empty Time Too Short Fault' occurs? Ethernet driver for mac os high sierra.

• Check ink pressure (left-hand pressure gauge). If necessary, call the hotline.
• Check ink expiry date. Ink viscosity may be too low.
• Replace with fresh ink.

What should I do when 'Flow Time Too Long Fault' occurs?

• Check ink system for leaks.
• Replenish ink.

Contact Us

Equipment Sales:
+353 1 450 2833

Service & Support:
+44 1480 443160 (Republic of Ireland)
03301233930 (Northern Ireland)

You will find information for the following issues here:

What should I do if I can no longer see anything on the display?

• If the printer is running normally but no display is visible, adjust the contrast. Please call the hotline.

'No air for warmup Fault'

• Check input pressure on pressure gauge (approx. 6 bar).
• Check quality of compressed air. It must be free of oil and water.

What should I do when 'Ink Out Fault' occurs?

• Check the fluid level (make-up, ink).
• If the level is OK, please call the hotline.

What should I do when 'Phasing Fault' occurs?

• Is the head dirty? Turn the printer off, clean with make-up solution, dry the printhead and re-start.
• Check ink expiry date and replace with fresh ink if expired.

What should I do when 'No Signal Fault' occurs?

• Is there a jet? If not, the nozzle is blocked.
• The catcher may be overflowing and the return suction line blocked. It should be cleaned.

What should I do when 'Reservoir Overfill' occurs?

• Cleaned too often or for too long, too much fluid in the module.
• Drain some fluid (approx. 20ml) from the module. Call the hotline.

What should I do when 'HV Fault' occurs?

• High Voltage plates in the printhead are dirty. Clean.
• Short circuit through ink. Clean head thoroughly.

Kubota k 008 e manual. What should I do when 'Empty Time Too Short Fault' occurs?

• Check ink pressure (left-hand pressure gauge). If necessary, call the hotline.
• Check ink expiry date. Ink viscosity may be too low.
• Replace with fresh ink.

What should I do when 'Flow Time Too Long Fault' occurs?

• Check ink system for leaks.
• Replenish ink.

Contact Us

New Equipment Sales:
(866) 871-3226

Service & Support:
(833) 760-0609